HYDRO SLAVE BLOCKS

		*HYDRO SLAVE BLOCKS AND ROLLERS* 9’’ H.D. Speed Block $395.00 Designed for heavy duty offshore pot fishing. Has an extra large deep V sheave to allow even bigger floats to pass through. Working width 4-3/4". Stainless Steel "eye bolt" on top!
4" New Super Block - Alum Roller High or Low Lip ~ $188.00 4" New Super - Stainless Roller High or Low Lip ~ $210.00 5’’ Super Block - Alum Roller High or Low Lip ~ $208.00 5" Super Block - Stainless Roller High or Low Lip ~ $287.00 Blocks have sealed taper roller bearings packed in hydraulic oil!		*4 and 5 inch High-Lip Super Blocks. Aluminum main frame and end plate. Standard aluminum roller. Stainless roller optional. Low lip models shown below.*
*STAINLESS STEEL HOOK WITH STAINLESS STEEL GREASE FITTING! DESIGNED TO BE MAINTENANCE FREE WITH PRE-GREASED SEALED TAPERED ROLLER BEARINGS THAT DON'T REQUIRE FURTHER GREASING!*
*4" Super Low Lip*	*4" Super High Lip*	*5" Super Low Lip*	*5" Super High Lip*
*4" Super Blocks have an overall height of 14-1/2", with a working roller width of 2-1/3". Height of hanging point to warp is 8-1/2". Holding capacity is 2,000 lbs.* Specify stainless steel "hook" or "eye bolt" for top of block.		5" Super Blocks have an overall height of 16", with a working roller width of 4-1/4". Height of hanging point to warp is 9-3/4". Holding capacity is 2,000 lbs. Roller hardened in center. Specify stainless steel " hook" or "eye bolt" for top of block.