 |

12-INCH 90-DEGREE
Hydro-Slave
pot haulers have a seal to protect the motor shaft from salt water. Stainless
steel grease fittings allow you to be able to grease the eye hook swivel,
as well as keep the motors shaft submersed with grease, to assure no
salt water penetration to the motors shaft.
|
|
 |
|

|
10 Hanging Pot Hauler
Includes
2 Aluminum Fairlead Rollers
Uses H series motors 101-1003 standard
425 lbs dead lift with 7.5 gpm @ 1500 psi
Standard = $879
with S.S. Discs/Splitter, Disc Liners = $1010 |
10 90-DEGREE
Uses H series motors 101-1003 standard
425 lbs dead lift with 7.5 gpm @ 1500 psi
Standard = $700
with S.S. Discs/Splitter, Disc Liners = $830 |
12 Hanging Pot Hauler
Includes
2 Aluminum Fairlead Rollers
Uses H series motors 101-1004
600 lbs dead lift with 12 gpm @ 1500 psi
Standard = $1030
with S.S. Discs/Splitter, Disc Liners = $1220 |
12
90-DEGREE
Uses H series motors 101-1004
600 lbs dead lift with 12 gpm @ 1500 psi
Standard = $862
with S.S. Discs/Splitter, Disc Liners = $1053 |
14 Hanging Pot Hauler
Includes
2 Aluminum Fairlead Rollers
1200 lbs dead lift with 15 gpm @ 2500 psi
Standard = $1718
with S.S. Discs/Splitter, Disc Liners = $2138 |
14
90-DEGREE
1200 lbs dead lift with 15 gpm @ 2500 psi
Standard = $1456
with S.S. Discs/Splitter, Disc Liners = $1876 |
17 Hanging Pot Hauler
Includes
2 Aluminum Fairlead Rollers
2900 lbs dead lift with 15 gpm @ 2500 psi
Standard = $4250
with S.S. Discs/Splitter, Disc Liners = $4709 |
17
90-DEGREE
2900 lbs dead lift with 15 gpm @ 2500 psi
Standard = $3800
with S.S. Discs/Splitter, Disc Liners = $4349
*17" Stainless Model = $4983 |
|
|
3/4-HP
ELECTRIC
POT HAULERS
All Electric Haulers
Come With: Wire Harness, Switch, and Solenoid
18-1, 28-1 and 36-1
reduction gear options.
Splitter knife can be moved into 4 available positions! Motors are reversible! Can pull in either direction depending on
wire placement. Speed up to 322 fps, and lift up to 197-lbs
continuous. Electric
haulers will accept rope sizes of 5/16 and 3/8 out of the box.
For smaller rope to 1/4" simply remove the shims, or for
larger rope to 3/4" just add extra shims. Modification (grinding) to the splitter knife may be necessary
depending on how rope rides in pinch plates. |
 |
ELECTRIC
HAULERS
10-Inch Discs, 3/4hp Electric
Heavy Duty Leesen Motor |
| STYLE |
STANDARD
STEEL |
WITH
STAINLESS DISCS & SPLITTER, GALVANIZED DISC LINERS |
| 90 Degree Mount |
$1299.00 |
$1430.59
(One 3" Fairlead Roller $67.00 Extra) |
| Hanging Mount |
$1495.00 |
$1625.62 ~
Includes 2 Fairlead Rollers |
| |

12" SEA KING
SPORT = $995.00 |
THE
SEA KING SPORT
A 12" Stainless 3/4HP Electric Trap Hauler
Includes Switch, Solenoid, Wire Harness, & 3"
UHMW Fairlead

| PERFORMANCE
CHART |
| GEAR
RATIO |
AMP
DRAW
FULL LOAD |
AMP
DRAW
50% LOAD |
CONTINUOUS
LIFT/
INTERMITTENT LIFT |
| 18:1 |
75 |
37.5 |
77
LBS / 419 LBS |
| 28:1 |
75 |
37.5 |
119
LBS / 652 LBS |
| 36:1 |
75 |
37.5 |
153
LBS / 840 LBS |
|
|
|
OPTIONAL
HAULER ACCESSORIES
Hydro Slave pot haulers can be
purchased with optional disc wear liners to protect your pinch plates from
wear. Honda power packs can also be purchased along with hydraulic tanks
and all of the necessary components to run your haulers if you do not
already have hydraulics installed on your vessel.
DISC
WEAR LINERS

10" $18.12/set, 12"
$21.50/set, 14" $37.08/set
. |

Will run
the 8", 10", 12", & 14" haulers.
|
5.5
HP HONDA
POWER PACKS
11 GPM @ 2000 PSI
1/2" NPT OUT & 3/4" RETURN
3-GAL OIL TANK
The 2-stage pump has a stable kick down feature
which will cut the flow of oil and prevent the motor from stalling
if your gear gets hung down. When the gear frees up normal hauling
speed will return.
MANUAL START (70-LBS) = $1200
ELECTRIC START (79-LBS) = $1370
Dims: 22" x 22" x 20" tall
Weight: 68-lbs (no oil, no gas)
Use
with a SPW-4 Control Valve
Steel = $660.60 S.S. = $918.00
Control Handle
$79.00
*We don't offer hoses or davits* |
| HYDRAULIC
FLUID TANKS |
 |
3
Gal (12x12x6) $225
6 Gal (16x16x6) $268
12 Gal (16x16x12) $325
24 Gal (21x22x12) $465 |
| Tank
must hold 1 gal of oil per every gpm pump is rated for, or 50% of
this if running @ idle. Example: 24 gal tank for a TC-24 pump. If
running @ idle then you can get away with a 12 gal tank. |
|
 |
 |
| Hydraulic
Motor on a 10" Hanging Hauler |
S.S.
10" Hauler with Galvanized Disc Liners |
|