|
|
JIM BUOY JUMBO FLOATS
|
JIM BUOY'S NEW LINE OF SUPER GIANT MARINE FENDERS! Not an inflatable but a 98% closed-cell inner foam core that will never blow-out or sink - even bullet holes will not materially affect its function! Often referred to in the industry as the "hull saver", Jim Buoy's unique design is not simply a roll of foam but is a carefully crafted, quality product incorporating the same U.S. Coast Guard Approved foam used in the Jim-Buoy Industrial Life Preservers. The end product is a rugged fender that provides "stop-gap" compression when hard hit time after time; not only protecting the ship from damage but the dock and even the fender itself! |
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| HIGHLY
RESISTANT TO ABRASIONS AND PUNCTURES
Encased in an outer covering of "Elastomic Skin" (up to 5/16" thick material, some reinforced with nylon mesh) plus a urethane skin base, the Jim Buoy Giant Marine Fenders are extremely resilient and able to flex with the rigors of high energy berthing over and over again, providing the user with extended service under all conditions. All Models may be mounted vertically or float horizontally. Models up to 24" diameter feature a 1" thru-hole that provides easy access for tethering while the larger models are furnished with a specially designed "end cap" that incorporates a 5/8''or 1-1/4''shaft and galvanized steel rope swivel for maximum strength at this critical area of stress. |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SUPER JUMBO FLOATS ALL HARDWARE HOT-DIPPED GALVANIZED STEEL. FORGED EYE AND SWIVELS TO 2" DIAMETER SHAFT SIZE. INTERNATIONAL ORANGE COLOR: SEAMLESS CROSS-LINKED POLYETHYLENE SHELL WITH SOLID 2 LB URETHANE FOAM CORE. SPECIAL HARDWARE IS AVAILABLE TO FIT SPECIFIC INDUSTRIAL REQUIREMENTS. CALL 760-948-8003 FOR PRICE QUOTES, OR WRITE TO: info@blueoceantackle.com |
 |
| Jumbo Hose Floats for applications where a split design float is required for fitting to existing hose lines. Rock hard outer shell has molded recesses to fit stainless steel strapping and buckle generally used to secure buoy around line. Photo illustrates a buoy used on a 9 1/2" diameter hose required for an oil field application. | JUMBO
HOSE FLOATS |
 |
Jim Buoy's Industrial Floats and Buoys are a rugged, top quality product available in 6 sizes and suitable for a wide range of applications. They are currently being used in many parts of the world functioning as mooring buoys, rope floats and marker buoys. All models are rectangular in shape to permit conversion to split-hose floats to facilitate strapping the floats in place during use. Built for continuous duty and long life, the shell is constructed of HDP .060 - 180 thickness to withstand severe punishment and is bonded over high density USCG Approved grade polyurethane foam. |
All
models may be furnished with either stainless steel or hot-dipped
galvanized steel in 1/2" to 1" diameter. thru-holes or may be
furnished with drop-forged swivels if required. They may also be ordered
with PVC or steel tubing instead of eye and swivel hardware. All sizes
are available in white or orange molded-in color. Please specify color
and hardware requirement with order.
|
|
