LINE SETTERS FOR LONGLINE SYSTEMS

Anodized Aluminum Construction
Hydraulic Motor with Stainless Steel Shaft
Replaceable Drive Wheel Elements
Automatic Main Spool Control
Speed Control; ON/OFF Control
Smooth, Quiet Operation
Dual Idler Rollers
Quick Release Idler Rollers for Easy Threading & Maintenance
Ball Bearing, Stainless Steel Entrance Guide Rollers
Digital Speed Read Out, Self Powered (optional)
Mounts on Motor Side of Frame
Weight 100 lbs. ~ Flow & Pressure Requirements: 12 GPM @ 1,500 PSI

The Lindgren-Pitman LS Series Line Setters are designed to pull monofilament longlines from the hauling/storage spool at a rate equal to or faster than the boat speed, as desired. The line can be set with a predictable sag between floats for fishing baits both deep and shallow as required. Bait depth can easily be controlled by adjusting the line setter speed control. Line setting speed is displayed on an optional digital readout meter to ensure accurate and repeatable line setting.

Hook and bait depth are a function of boat speed / setter speed, distance between floats, and buoy line length plus gangion length. Using the specially designed chart provided with the LS series line setter the maximum hook depth for the particular conditions can easily be calculated.

LS-5 LINE SETTER = $5970.00

LP-SPEED-LS

LINE SETTER DIGITAL SPEED READ-OUT
$1255.00

	Self Powered
	Begins to Display at Approximately 3 Knots
	3 Digit Display
	1/10th Knot Resolution
	High Accuracy
	NEMA 4 Watertight Enclosures
	Signal & power derived totally from magnetic pickup or pulser.
	No power supply connections.
	High immunity to electrical noise.
	Intrinsically safe, can be used in hazardous environments.
	Display: 3 active digits non-blinking LCD display, character height 0.5 inches.
	Display contrast increases with increasing ambient light.
	Ideal for both indoor & outdoor installations.

LP-TIMER-2

NEW HOOK & BUOY COUNTER / BEEPER
$750.00

	Hook Time Settable from 1 to 99 Second Interval
	Buoy Time Settable from 1 to 999 Second Interval
	Automatically Counts Hooks and Buoys
	12-15 Volts D.C.
	Impact and Corrosive Resistant Enclosure
	Hook and Buoy Duration can be changed “During Operation”
	Tactile Feedback Membrane Switch with LED Display
	Enclosure - IP66, UL508, and CSA Type 4 Rating
	Measures 7 in. X 5 in. X 3 in.
	Internal Amplifier with External Speaker Outputs
	Includes ABS Plastic PA Speaker Horn
	Easy to Operate