TEL (760) 948-8003  FAX (760) 948-7707
sales@blueoceantackle.com
 

LINKS AND SHACKLES

ANCHOR SHACKLES AND CHAIN SHACKLES

Anchor Shackle

Chain Shackle
MARQUIP SHACKLES OFFER MAXIMUM LOAD CAPACITY AND SAFETY FOR MARINE AND CONSTRUCTION HEAVY LIFT OPERATIONS UTILIZING A 6:1  WORKING LOAD LIMIT. wide JAWS FACILITATE EASY INSTALLATION ON CHAINS, FLOUNDER OR TOW PLATES, TOW WIRE, BELL SHACKLES AND PAD EYES. BOTH BAILS AND PINS ARE FORGED OF 4340 EXTRA HIGH STRENGTH ALLOY STEEL. EACH PIN IS THEN SPECIALLY MACHINED AND INDIVIDUALLY PRECISION FITTED TO ITS SHACKLE TO  MINIMIZE WEAR FROM HEAVY OR SURGING LOADS AND VIBRATIONS. ALL SHACKLES AND PINS ARE HEAT TREATED AND MAGNETIC PARTICLE INSPECTED. WORKING LOAD LIMITS RANGE FROM 40 TONS TO 185 TONS, DEPENDING ON SHACKLE SIZE AND STYLE.
SAFETY PINS RANGE IN DIAMETER FROM 2 TO 4-1/4 INCHES

ANCHOR CHAIN SWIVELS
FOR 1/2" TO 4" CHAIN
NAVAL MOORING SWIVEL SHACKLES
2" AND 2-3/4"

Oval_Pin_Shackle_Specs.jpg (60195 bytes)
OVAL PIN SHACKLES
1/2" TO 3-3/4"

ROUND PIN SHACKLES
1" TO 5"


KENTER LINKS
3/4" TO 3-3/4" CHAIN SIZE
Kenter Link Breakdown Tools
Use a sledge hammer to hit the punch hammer to knock out the pins!

Punch Hammers $54.95 each
4 LB Sledge Hammers  $41.50 each

MARQUIP tow plate

Towing Plates that are simpler, stronger, and safer!

Its patented design lets you rig the bridle with only three shackles, eliminating the extra cost, weight, time and risk of older-style flounder plates. The No. 2 Tow plate features an extra hole for a tandem shackle to tow additional barges, or to haul in the bridle. Cast from nickel-chrome steel, MARQUIP plates also provide maximum corrosion resistance. They are available in 300,000#, 500,000# and 1,000,000# pull test capacities, WITH WEIGHTS OF 70 LBS, 190 LBS, AND 560 LBS, and can be certified upon request.
MARQUIP Towing Assembly
Towplate and three shackles with bridles attached.
towassy.jpg (23103 bytes)
CLICK PHOTO FOR LARGE VIEW

MARQUIP
forged detachable chain connecting links
replace bulky shackles and end links. They make better-than-original repair or replacement links, they serve as connecting links for 90' shots of chain and they ride through hawse pipes and over wildcats as smoothly as normal chain. made of alloy steel, heat-treated to tensile strength of approximately 150,000 PSI, they're as strong as or stronger than the chain links. The positive-lock assembly consists of a stainless steel pin and lead plug; the break tests surpass USN and ABS requirements. Additional certifications are available upon request. Links are available in sizes up to 3-1/2". Cast links are also available, in sizes up to 4-3/4".

pear_shaped_conn_link.jpg (56386 bytes)
Click to view size chart
DETACHABLE ANCHOR
CONNECTING LINKS
3/4" to 4-1/2"
break tests: 113,500 lbs to 2,805,000 lbs
END SHACKLES
BENDING SHACKLES
1/2" to 3-3/4"

ANCHORS AND CHAIN
MAIN MENU