MADE IN CALIFORNIA
BUOYS ~ FENDERS ~ DREDGE
FLOATS ~ PILINGS ~ PORT SECURITY BARRIERS ~ DONUT FENDERS ~ HARDWARE ~ FENDERS
FOR BUNKERING AND DOCK PROTECTION
closed cell aspect of the energy absorbing foam allows the fender
to be fully functional even if the skin has been accidentally
punctured. In comparison to equally sized pneumatic fenders
Ocean Guard™ Netless Foam-Filled Fenders absorb up to 40% more
energy! The energy
dissipation of the foam core construction allows for a gentler recover
after compression. This virtually eliminates the rebound effect vessels
experience from other types of fendering systems such as hard
rubber fenders, pile fenders, pneumatic fenders and panel
here for capacity chart!
call or write for more information.
GUARD™ FLOATING MONOPILE DONUT FENDERS
This unique fendering system
provides a floating energy absorbing foam filled fender designed to
simply slip over a stationary monopile and float at the fluctuating
water line. Upon contact of a ship this fender will rotate freely and
will self-adjust with the changing tides.
These monopile fenders provide a
high rate of energy absorption with a relatively low reaction force. As
with all the foam filled fenders this system produces a smoother,
gentler berthing than hard rubber bucking fenders, while producing low
reaction forces. Additional energy absorption is also supplied by the
Freely rotating Ocean Guard™
Monopile Donut Fenders eliminate shear forces of a contacting vessel.
The internal anti-friction UHMW bearing pads allows the fender to slide
around and up and down the pile, and it allows the vessel to roll along
CONFORMING FLEXIBLE DESIGN
Ocean Guard™ Monopile
Donut Fenders flexible energy absorbing foam core and its tough
resilient elastomer skin give it the unique ability to conform to a
vessels hull contours and extremities, such as rub rails. This is a safe
fendering system that due to its solid foam core will allow the fender
to fully function even if it becomes damaged, and the tough skin allows
the fender to withstand the worlds harshest environmental conditions.
Ocean Guard™ Monopile
Donut Fenders come in standard sizes of 4.5' diameter up to 9' in
diameter, with five energy absorbing levels.
Bridge & Corner Protection ~ Dock Fendering in large tidal
change areas or where vessels need "roll along" fenders ~
Ferry Applications ~ Lock Entrances ~ Areas where maneuverability is
tough and vision is difficult ~ Areas where side to side current is
GUARD SSD FOAM FILLED FENDERS
Small Standard Duty - with or without hawse pipe fittings.
Designed for quick and convenient use.
CLICK PHOTO TO ENLARGE DETAILS AND SPECS
GUARD FOAM FILLED MARINE BUOYS
Mooring Buoys & Buoy Release Hooks
Impact absorbing closed cell cross-linked polyethylene foam cores. Heat
laminated into a one piece solid foam core. A thermal bond is produced
between the layers of foam which is stronger than the foam itself. Buoys
are able to absorb vessel impacts without damaging the buoy or the
TO BUOYS MAIN PAGE