TEL (619) 336-2403  FAX (619) 649-0909
sales@blueoceantackle.com
 


MARINE MARKETPLACE
GREAT USED GEAR AT GREAT PRICES

4 NEW LANTEC HYDRAULIC FREEWHEEL WINCHES WITH POWER PACKS
THESE ARE NEW, UNUSED WINCHES

Click photos to enlarge
  IMG_1700.jpg (97041 bytes) IMG_2996.JPG (48159 bytes)

Seller paid almost $850,000
OFFERS OF $400,000 WILL GET THEM TALKING!
Call Mark today: 619-336-2403

These mooring winches (qty 4) are not normal off-the-shelf Lantec's. They are designed to freewheel and have an extra brake-band. One drum holds 4,000 feet of 1-1/4" cable. There's enough free flange above the top layer to allow for two additional layers of cable if needed. Everything on hand to make these things go including the power packs. Power units: qty 3 - 125 hp electric motors that drive Kawasaki hydraulic pumps (3 x K3VL140). The motors that will be mounted on the winches are MRH 2-45 radial piston motors.

FOB Seattle, WA
Asking: Best Offer!


680 CONSTRUCTION TYPE BLOCKS
USED ONLY AS HOLD BACKS ON A BRIDGE PROJECT (USING 10:1 FACTOR!)
GREAT CONDITION - TO BE REFURBISHED, CHECK PINS/BEARINGS, AND PAINTED!

mckissick construction block 55 and 65 ton McKissick Blocks
1" wire
20" sheaves
4:1 Design Factor
900Q ISO/API Q1 Certified

NEW RETAIL IS $6,500
WE ARE OFFERING THESE FOR ONLY $4,000 (REFURBISHED)
$3,500 AS IS
FOB Seattle

All 680 Series Blocks are furnished standard
with Bronze Bushings, and are furnished with McKissick® Roll Forged™ Sheaves with flame hardened grooves. Sheaves are lubricated through center pin, with 
a separate lube channel to each sheave.

4 each Vertical Warping Capstans
18” Barrel, 22 hp, 1,300 PSI/30 GPM.

Hyd Port Size:  ¾” NPT
Line Pull:  25,000 lbs @ 25 FPM
Bollard Rating:  100,000 #
Flow Control:  None-Provide via HPU
Relief valve:  None-Provide via HPU
Mfg:  Schoellhorn-Albrecht
Model:  SA1817-22H
Mfg Year:  April 2008
Ops:  6 hours

Price:  $32,000 ea. ($30,000.00 ea if purchasing all 4)
FOB Seattle

*Sacrificial steel doubler plates included. Base Plates are approximately 48"x48". Overall height is approximately 53".

 

Used 4800-lb Kedge Anchor

Includes 10 ft of 1-1/4" anchor chain - Great for displays!

$2200 FOB Seattle

DSC03734.JPG (2240711 bytes)

Used Anchor Chain

Many sizes available.
Stock in Seattle, Wilmington, Houston, Belle Chasse


2004 Caterpillar IT38G Tool Carrier, s/n CSX00488, 7,473 hours, EROPS/AC, GP Bucket, Forks & Boom, Very Good Condition. 

FOB Tampa, FL
$78,500.00
Manitowoc 4000W 175 Ton Crawler Crane: S/N 40468, 110' #22 Boom (Basic Boom – Base, Tip, and 40' Insert), Open Throat Tip, Cummins 855-C-380 Diesel Engine, Vicon Control System, Independent swing and Travel, Independent Boom Hoist, 48" Track Pads, Hook Block, OSHA inspected.

FOB Houston, TX
$360,000.00

1966 American 7250 SN 11600, 60 tons, Cummins w/ twin disc, 80' 46H, 3rd drum, independent, undercarriage 80%.

FOB Houston, TX
$90,000.00

American 5299, 60 tons, SN 10668, 100' 46S, block, Detroit , 3rd drum, independent, new paint.

FOB Houston, TX
$90,000.00

1990 American 5300, 70 ton crawler crane, S/N 9007AC3516, Cummins 6cyl diesel, 3 stage torque, 120’ 46HR boom, controlled load lowering on 1, 3rd drum, independent swing and travel, 40 ton block and downhaul ball, hydraulic extendable track frames, undercarriage 70%, New environmental cab W/AC & heat, new paint, crane in excellent condition and ready to work, load system and ATB upon request.

FOB Mississippi
$260,000.00

1999 Grove RT635C 35-Ton Rough Terrain Crane, s/n 83013, 6,854 hours,105 ft. Boom, 29 ft. to 51 ft. Jib, (2) Winches, Ball and Block, Cummins 6BT5.9 Diesel Engine, 23.5 x 25 Tires, Excellent Condition with all records and Certified.

FOB Spartanburg, SC
$186,000.00

2001 John Deere 772CH Motor Grader, s/n DW772CH579666, 6-Wheel Drive, 3,745 hours, EROPS/AC/Lights, 14 ft. Moldboard, Snow Wing, 13 ft. Hydraulic Angling Plow, Engine Enclosures, 14.00 x 24 Tires, Ex-County Machine in Excellent Condition.

FOB Aurora , Colorado
$105,000.00


MAIN MENU