|
Designed
to safely lower a load and automatically release the load upon reaching
the seabed or other supportive surface.

Offload Hook Specifications:
| MODEL |
MATERIAL |
WEIGHT |
BREAKLOAD |
CAPACITY
(SWL) |
| OLH15 |
Heat-treated
SS Plate |
7.2 lbs |
33,069
lbs (15 m tons) |
6,614
lbs (3 m tons) |
| OLH25 |
Heat-treated
SS Plate |
14 lbs |
50,000
lbs (22.68 m tons) |
10,080
lbs (4.57 m tons) |
| OLH165 |
Heat-treated
SS Plate |
22 lbs |
330,693
lbs (150 m tons) |
66,139
lbs (30 m tons) |
|
Operation:
FIG.1 shows the Sea Catch Offload Hook OLH25 with a
pivoting hook sized to receive up to 3 inch (7.62 cm) diameter
load line or strap. Aligned holes are provided as shown to lock
both hook parts with a hitch pin in order to prevent premature
opening of hook. Counterweight hole is sized to receive up to size
1-1/2" shackle or any heavy object whose weight exceeds that
of the load line or strap without a load. For example, four size
7/8" shackles can be attached to a size 1-1/2" shackle
for a combined counterweight of 36.8 lbs (16.69 kgs). The OLH25 is
secured to a size 7/8" lifting shackle as shown and the load
is deployed. Once the load is safely suspended, the hitch pin is
removed and the load is slowly lowered. Once its weight is
transferred from the hook to the seabed or other supportive
surface, the counterweighted hook rotates on the pivot pin as
shown in FIG. 2, thereby releasing the load line. The hook is then
lifted and recovered. Stainless steel hitch pin is provided.
Shackles are not provided.
Recommended Test:
With the full weight of the load line on the hook, the
weight of the counterweight should be sufficient to fully rotate
the hook and release the load line.
Disclaimers:
This device must not be used in high seas when the hook may
be subjected to extreme dynamic load fluctuations or encounter a
zero-load condition. Excessive current, side loading, and
irregular bottom conditions may adversely affect the intended
function of the device. Causing the hook to prematurely encounter
a zero load condition may cause the hook to inadvertently release
the load and cause harm to persons and/or property.
Shackle
Size and Weight:
2-1/2"---98.25 lbs (44.56 kgs)
2"--------52.25 lbs (32.7 kgs)
1-3/4"---33.91 lbs (15.38 kgs)
1-1/2"---20.8 lbs (9.43 kgs)
1-3/8"---15.83 lbs (7.18 kgs)
1"--------6.12 lbs (2.77 kgs)
7/8"-----4 lbs (1.81 kgs)
3/4"-----2.72 lbs (1.23 kgs)
| |