|
![]() |
CLR-6 MK-II
AND CLR-10 MK-II COASTAL LIFE RAFTS FOR 6 OR 10 SOLAS-6
MK-II |
| The Switlik CLR6 Life Raft provides two separate chambers within the
buoyancy tube by using two internal sleeves, which are each closed at one end.
The open ends are attached to the inside of the buoyancy tube at the same
position where bulkheads would normally be found. Upon inflation of the life
raft, these internal sleeves lie flat and uninflated on the bottom of the raft
buoyancy tube, because air pressure throughout the entire interior of the buoyancy tube is equal. |
|
| SOLAS retro-reflective tape Sea anchor (secured on raft tube) Heaving ring and line (on raft tube) Safety knife (on raft tube) SOLAS locator light Boarding ladder 50' Mooring line Ballast pockets, large volume (4) Urethane coated nylon buoyancy chambers Intl. orange hi-visibility canopy with blue lining Furlable canopy top |
Furled canopy sides (2) Hi-load strength attachment points CO2 inflation system (located on raft side) Exterior life lines Interior grasp lines Canopy furling ties Canopy zipper Raft righting strap Over-pressure relief valves (4) Canopy support arches (2) Topping off valves (4) |
|
|
|
|
USCG APPROVED SOLAS LIFE RAFTS
| CAPACITY | MODEL NUMBER |
CONTAINER DIMENSIONS |
WEIGHT IN CONTAINER |
SHIPPING WEIGHT |
SHIPPING DIMENSIONS L X W X H |
| 6 | CGF-6-A-STD-MK II | 37"L
x 23.5"W x 17"H FLAT FIBERGLASS CONTAINER |
165 lbs. | 188 lbs. | 38"X28"X20" |
| CGF-6-B-STD-MK II | 37"L
x 23.5"W x 17"H FLAT FIBERGLASS CONTAINER |
133 lbs. | 158 lbs. | 38"X28"X20" | |
| CGR-6-A-STD-MK II | 21"
DIA. X 44" LONG ROUND CONT. |
175 lbs. | 298 lbs. | 61"X30"X35" | |
| CGR-6-B-STD-MK II | 21"
DIA. X 44" LONG ROUND CONT. |
143 lbs. | 265 lbs. | 61"X30"X35" |